|
CG-60AR |
CG-100AR |
CG-130AR |
Acceptable sheet width |
90 - 740 mm |
90 - 1,250 mm |
90 - 1,550 mm |
(3.5 - 29.1'') |
(3.5 - 49.2'') |
(3.5 - 61.0'') |
Effective cutting area *1 |
606 mm × 51 M (23.9'' x 167.3') |
1,070 mm × 51 M (42.1'' x 167.3') |
1,370 mm × 51 M (53.9'' x 167.3') |
Maximum speed |
Cutting: 73 cm/s (28.7''/s), Moving at 45° direction: 103 cm/s (40.5''/s) |
Adjustable speed range |
1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9''/s (0.4''/s step adjustment) |
10 - 73 cm/s (5 cm/s step adjustment): 4.0 - 28.7''/s (2.0''/s step adjustment) |
Mechanical resolution |
X direction: 2.5 μm, Y direction: 5 μm |
Command resolution |
25 μm, 10μm(MGL-IIc) / 100 μm, 50 μm(MGL-Ic1) |
Repeatability *2 |
± 0.2 mm / 2 M |
Effective Repeatability |
586 mm × 2 M |
1,050 mm × 2 M |
1,350 mm × 2 M |
Maximum pressure |
550g |
Range |
Cutter |
10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step) |
of down pressure |
Pen |
10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 150g (10 g step) |
|
Creasing tool |
10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step) |
Acceptable sheet *3*4 |
Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet and Cardboard (used in combination with an optional sheet table) |
Acceptable tool *5 |
Eccentric cutter, Creasing tool, commercially available ball-point pen |
Type of command |
MGL-IIc / MGL-Ic1 |
Interface |
USB, RS-232C, Ethernet |
Receiver buffer size |
About 27 MB as standard (17 MB when sorting is effective) |
Operational environment |
Temperature: 5 - 35 degC (41 - 95 degF), |
Humidity: 35 - 75 % Rh (Non-condensing) |
Power supply |
AC 100 V - 240 V 1A 50/60Hz |
Power consumption |
168W or less |
228W or less |
Dimensions(W×D×H) |
1,010 × 355 × 355 mm |
1,510 × 580 × 1,160 mm |
1,810 × 580 × 1,160 mm |
(39.8 × 14.0 × 14.0'') |
(59.4 × 22.8 × 45.7'') |
(71.3 × 22.8 × 45.7'') |
1,010 × 580 × 1,160 mm *6 |
|
|
(39.8 × 22.8 × 45.7'') *6 |
|
|
Weight |
17kg (37.5 lb) |
35kg (77.2 lb) |
43kg (94.8 lb) |
27kg (59.5 lb) *6 |
Stand |
Options |
Standard equipment |